I'm a SW developer and I just got this book because I was curious about Home Automation, I had no idea about it and this book really cleared my mind easy reading and amazingly easy to implement If you're a beginner I totally recommend it!

I am very into the X-10 gadgets and have been for several years. This book was intended for the average homeowner interested in inexpensive home security. The only thing it lacks is diagrams and layouts for the systems it covered.

I am very into the X-10 gadgets and have been for several years. This book was intended for the average homeowner interested in inexpensive home security. The only thing it lacks is diagrams and layouts for the systems it covered.

This book presents a great variety of ideas for using the X10 protocol. I'm sure every reader will find several ideas or projects interesting enough to try.

Although I've been using X10 products for over five years, I have found this book to be a very useful reference. What I like about it is that it starts off with the very basics and move through to the esoteric ... something for everyone.

I recommend this book to the beginner or to the experienced. I'm glad I bought it: I refer to it all the time.

"Smart Home Hacks" provides a basic introduction to X10-based home automation, a technology that's been around since the 1970s. For the most part, the book just scratches the surface of the subject and often goes off on unrelated tangents, such as an example of how to build a robot lawnmower. What's missing is a more comprehensive overview of X10-compatible modules and the different ways they might be used to solve home automation problems. For example, irrigation is a very practical application that's ideal for a computer, and there are X10-based models, such as the Rain8 made by WGL designs. But the author chooses to ignore irrigation because of a perceived flooding hazard, even though the Rain8 has an internal limiter that shuts off the water even if no X10 "off" signal is received. Many pages are devoted to computer automation systems sending text-base messages, but no mention is made of voice-based solutions which are much more practical and cost-effective. The newer software applications that are available are impressive but it's amazing how primitive the available hardware is. The book fails to mention one of the biggest obstacles to X10 deployment: the need for a "neutral" (white) wire in household wiring. Since most light switches are wired with a simple 2-wire loop-back for economic reasons, it would require expensive re-wiring to use X10 switches. And, unless I missed it, it fails to discuss the problem of X10 signals not being passed to the "other side" of typical 2-phase house wiring. Only a passing mention is made to the new INSTEON technology that improves upon the old X10 protocol. So, although the book appears to be "current" it reads like it was written five years ago. "Smart Home Hacks" works best as sort of an idea cookbook. You'll find yourself bouncing around from one "recipe" to another but often finding most cool ideas can't be cooked up because of various obstacles (cost, permits, electronic expertise, obscure hardware, and so on).

SMART HOME HACKS: Tips & Tools for Automating Your House
Gordon Meyer
O'Reilly Media Inc.
ISBN: 0-596-00722-1

For years we have heard of how computers can provide benefits around the house. Television news programs show research labs using computers in conjunction with special equipment for recording or controlling test. I have often wondered, "How is this accomplished?"

Smart Home Hacks introduces you to previously hidden benefits our computers can provide. With software available for Macintosh and other operating systems we learn to control many items in and around our home from our computer's CPU.

How is this done... using the existing 120 VAC wiring in our walls to transmit and receive signals via X10 transmitter and receivers around your house. Whether controlling 12 volt landscaping lights, the timing cycles for your pool pump, or simply turning lights and sound on and off for security reasons, from the ground up Gordon Meyer's Smart Home Hacks explains the process.

Your computer can send messages to your cell phone, pager, or e-mail account. Driveway lights can be set to come on and remain on for a given period of time, and sprinkler systems can be controlled by your home computer. Meyer takes readers from the basics of X10 codes to starting your hot tub and having it ready when you get home.

For those wanting a computer to work for them this book even shows you how to monitor and plot heating oil fuel consumption. With broadband Internet service you can monitor Fido's actions when you are away from the house by adding video camera(s) and a link to the Internet.

To add cost effectiveness to a home, SMART HOME HACKS: Tips & Tools for Automating Your House is a great addition to a home library. Additionally, it should be considered as an ideal gift.

Technical people are always looking for ways that technology can improve and enrich their lives. Smart homes-or home automation-has always seemed like something more from science fiction than science fact. However, after reading this book, the truth is that creating a smart home is easier and far less technical than most people think. This book provides the reader with 100 tips or things that can be done (some quite easy, some might take longer to complete) to automate your home.

Contrary to what you might think, much of what you can do with home automation doesn't require your home to be re-wired. Instead, much of what you might want to accomplish (like having your computer automatically turning on or off lights in the house while you're on vacation) can be done very easily through X10 modules. X10 modules are relatively inexpensive components which can send signals over power lines. Once you understand X10, many of the more straightforward hacks in this book make a lot of sense.

Other projects you'll find in this book include a home monitoring system, a smart sprinkling system, sending messages of what's happening at home to a cell phone or pager, and even controlling your home from a web browser. While some of these projects may sound a bit Orwellian, they are actually very interesting and can make your home a safer place to live. Instead of becoming a victim when a toilet or washing machine overflows, you can put preemptive measures in place to be alerted before a problem occurs.

This is a very interesting book and a must read if you've ever considered home automation. Not only will this book step you through some projects, but it will give you some excellent ideas for the future. I enjoyed reading this book and would highly recommend it.

The essence of home automation is using specialized equipment that can control your lamps, appliances, heater, and air conditioning, and perhaps sense where in the house people are located. Every automation system is built upon these building blocks. Once these methods are in place, it's really not much of a stretch to have some actions performed automatically. For example, once you have the ability to detect when a person has left a room, turning off any lights that she might have left on is not much of a technical challenge.

This book focuses almost exclusively on using X10-based home automation technology. Technically speaking, X10 is a power-line carrier (PLC) communications method. This means it sends signals using the electrical wiring in your home, not unlike Morse code. Your appliances, lights, and everything else you have plugged into your home's electrical system continue to work: X10 sneakily adds its signals onto the wires in a way that standard AC equipment does not notice. However, when you have equipment that is tuned to listen to X10 commands, that equipment can be controlled as if by magic, reacting to signals sent by you, your computer, or even other X10 devices.

The essence of home automation is using specialized equipment that can control your lamps, appliances, heater, and air conditioning, and perhaps sense where in the house people are located. Every automation system is built upon these building blocks. Once these methods are in place, it's really not much of a stretch to have some actions performed automatically. For example, once you have the ability to detect when a person has left a room, turning off any lights that she might have left on is not much of a technical challenge.

This book focuses almost exclusively on using X10-based home automation technology. Technically speaking, X10 is a power-line carrier (PLC) communications method. This means it sends signals using the electrical wiring in your home, not unlike Morse code. Your appliances, lights, and everything else you have plugged into your home's electrical system continue to work: X10 sneakily adds its signals onto the wires in a way that standard AC equipment does not notice. However, when you have equipment that is tuned to listen to X10 commands, that equipment can be controlled as if by magic, reacting to signals sent by you, your computer, or even other X10 devices.

The author covers HA from the prospective of the MAC, OSX, XTension HA software and mostly X10 but don't hold that against him as it's not the goal of the book. I treated this book as more of an idea book and almost all the ideas are portable to other scriptable/extendable software. It's for those of us who have a little imagination, some programming experience and the willingness to put a little effort into programming. It is in no way a recipe book where you follow the directions step by step to build a project. I really like the book and I really find it perfect for bathroom reading (you can read a section pretty quick to get your ideas). :-)

And I forgive the author for not cover Linux better. :-)

If you have ever installed an X-10 module then this book is a waste of your money. I purchased this book based on the reputation of O'Reilly as a publisher. But after reading this book I will not make that mistake again.

This book contains very basic X-10 information, so if you are intrested in exploring the use of X-10 for the first time this book might be interesting, but I think there are far better places to start.

Examples... Hack #1 discribes basic X-10 addressing, hack #2 tells you how to turn on a light.... What a joke. Hack #88 "Streamline your Apple scripts" Well, like 95% of the world this has no use to me... I use a PC. Anothe Mac only hack is #91 which is using the mac iCAL program. There is no PC version. Hack #92 is for Charting... And you guessed it... It is for the MAC AGAIN! #93, MAC again...

So keep lookng this book not worth the money.

This is the first quality book that I have found on X10. It's invaluable. Both the hardware and software (for PC and Mac) are covered in depth here. There is coverage of the basics; turning on and off lights, using control boxes and timers, and using a PC as your control hub. But, as with the other Hacks books there are other more esoteric topics as well. Such as heating your toilet seat, managing your sprinkler system, and using X10 for security. An excellent book. A must buy for X10 users.

In yesterday's visions of tomorrow, a seductive scenario was the automated home. Meyer discusses how this is increasingly an affordable reality. The common factor between many of his hacks is the X10 standard for communicating with a device that is plugged into the electric grid, via that grid. Low bandwidth. But pervasive connectivity. On a related note, recently a government decision enabled electric utilities to offer Internet access via their power lines.

Unlike many other O'Reilly books on hacks, this one covers a wide range of hardware. Because the possible home automation topics are very diverse. From security (via motion detectors for example) to motorising window blinds to mowing the lawn to forwarding phone calls. The appliances for these come from many vendors. And some of the hacks are really low tech, though they are not bad because of that, mind you.

Meyer restricts himself to hacks that are achievable now. For maximum utility to you. He could also have added some speculation about future trends. Like IPv6, the next generation of the Internet. This will enable appliances, all the way down to light bulbs, to have their own internet addresses, and be remotely controlled. If you look carefully at many of the hacks that use X10, you can see the potential. The biggest impediment may be cost. Thus, many appliances don't implement X10. Imagine though that the cost became negligible. And X10 merged into IPv6, at perhaps the physical/data link levels. The scope of the hacks would be greatly enhanced. Ah well, we'll just have to wait for the future.